Shure MXA920ALR+P300-V Ceiling Mic and Speaker Bundle with 1x MXA920AL-R and 1x P300-IMX - Aluminium

Shure MXA920ALR + P300-V Ceiling Mic and Speaker Bundle: The Ultimate Solution for Crystal Clear Conferencing

MXA920ALR

• Effortless Setup: Automatic Coverage technology eliminates the need for complex setup, giving you instant control over audio capture. • Superior Sound Quality: Next-generation array architecture ensures enhanced directional pickup and natural speech, making it perfect for AV conferencing, camera tracking, voice lift, or sound reinforcement. • Wide Coverage: Covers a 30 x 30' area, capturing multiple talkers with ease.

P300-IMX

• Simplified Setup: Predefined matrix and presets reduce commissioning time, making it ideal for busy meeting rooms. • Versatile Connectivity: Connects to a variety of devices, including laptops, mobile phones, and video systems, via soft codec or USB. • Crystal Clear Audio: Features acoustic echo cancellation, noise reduction, and automatic gain control for up to 8 Dante channels, ensuring echo- and noise-free conference room audio.

Features:

• MXA920ALR:
  • For Meetings, Conferences, Presentations
  • Covers 30 x 30' Area, Requires No Setup
  • Automatic and Steerable Coverage Options
  • Captures Multiple Talkers
  • Automatic Mixing and Gain Control
  • Noise Reduction and Echo Cancellation
  • Dante, PoE, and Audio via Single Cable
  • Secure Audio Encryption
  • 8 Pickup Lobes with Innavidual Outputs
  • Designer System Configuration Software
• P300-IMX:
  • Connects 10 Dante audio inputs, 2 analog inputs, USB and a mobile device to an AV conferencing system or a PC-based videoconferencing application
  • Includes Shure developed DSP algorithms to enhance audio quality in AV conferences: 8 channels of microphone processing featuring AEC, noise reduction, and automatic gain control, IntelliMix automatic mixing, matrix mixing, delay, compressor and PEQ
  • Flexible signal routing and connectivity: analog audio (2 block in / 2 block out) to connect to room AV conferencing system; USB (1 in/out) to connect to laptop or room PC; one 3.5 mm TRRS jack to connect to a mobile device to enable an additional participant to join
  • Power-over-Ethernet (PoE+) eliminates the need for an outboard power supply
  • Compact form factor is easy to mount without equipment rack

Specifications:

• MXA920ALR:
  • General:
    • Coverage Type: Automatic or steerable
    • Power Requirements: Power over Ethernet (PoE), Class 0
    • Power Consumption: 10.1 W maximum
    • Control Software: Designer or web application
    • Cable Requirements: Cat5e or higher (shielded cable recommended)
    • Connector Type: RJ45
    • Plenum Rating: UL2043 (Suitable for Air Handling Spaces)
    • Dust Protection: IEC 60529 IP5X Dust Protected
    • Operating Temperature Range: 6.7°C (20°F) to 40°C (104°F)
    • Storage Temperature Range: 29°C ( 20°F) to 74°C (165°F)
  • Audio:
    • Microphone Elements: 113 MEMS
    • Frequency Response: 125 Hz to 20,000 Hz
    • AES67 or Dante Digital Output:
      • Channel Count:
        • Automatic coverage on: 2 total channels (1 output, 1 AEC reference in channel)
        • Automatic coverage off: 10 total channels (8 independent transmit channels, 1 automix output, 1 AEC reference in channel)
      • Sampling Rate: 48 kHz
      • Bit Depth: 24
    • Sensitivity: at 1 kHz, 1.74 dBFS/Pa
    • Maximum SPL: Relative to 0 dBFS overload, 95.74 dBSPL
    • Signal-to-Noise Ratio: Ref. 94 dBSPL at 1 kHz, 75.76 dB A-weighted
    • Self Noise: 18.24 dB SPL-A
    • Dynamic Range: 77.5 dB
    • Digital Signal Processing: Automatic mixing, acoustic echo cancellation (AEC), noise reduction, automatic gain control, compressor, delay, equalizer (4-band parametric), mute, gain (140 dB range)
    • Acoustic Echo Cancellation Tail Length: Up to 250 ms
  • Dimensions:
    • Weight: MXA920-R: 12.7 lbs (5.8 kg)
• P300-V:
  • General:
    • Input: (2) 3-pin block connector (Active Balanced)
    • Output: (2) 3-pin block connector (Impedance Balanced)
    • Mobile: (1) TRRS 3.5 mm (1/8')
  • USB Connections:
    • (1) USB 2.0, Type B
    • Single port carries 2 input and 2 output channels (Summed mono)
  • Network Connections (Dante Digital Audio):
    • (1) RJ45
    • 10 Dante Inputs, 8 Dante Outputs
  • Polarity: Non-inverting, any input to any output
  • Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4
  • Power Consumption: 17.5 W, maximum
  • Weight: 1710 g (3.8 lbs)
  • Dimensions: H x W x D: 4 x 21 x 22.6 cm (1.6 x 8.3 x 8.9 in.)
  • Control Software: Shure Designer
  • Operating Temperature Range: 6.7°C (20°F) to 50°C (122°F)
  • Storage Temperature Range: 29°C (-20°F) to 74°C (165°F)
  • Thermal Power Dissipation:
    • Maximum: 17.5 W (60 BTU/hr)
    • Typical: 14.6 W (50 BTU/hr)
  • Audio:
    • Frequency Response: +1, -1.5 dB, 20 to 20,000 Hz
    • Dante Digital Audio:
      • Dante Digital Audio Sampling Rate: 48 kHz
      • Bit Depth: 24
    • USB Audio
      • Sampling Rate: 48 kHz
      • Bit Depth: 16, 24
    • Latency:
      • Firmware 4.1 and newer:
        • Dante 1-8 in to Dante out (AEC enabled): 15.4 ms
        • Dante 1-8 in to Dante out (AEC disabled): 8.7 ms
        • Dante 9-10 in to Dante out: 3.4 ms
        • Analog in to Analog out: 3.8 ms
      • Firmware 3.1 and older:
        • Dante 1-8 in to Dante out (AEC enabled): 12.5 ms
        • Dante 1-8 in to Dante out (AEC disabled): 5.8 ms
        • Dante 9-10 in to Dante out: 1.8 ms
        • Analog in to Analog out: 2.2 ms
  • Analog Connections (Block Connectors):
    • Dynamic Range (20 Hz to 20 kHz, A-weighted, typical):
      • Analog-to-Dante: 113 dB
      • Dante-to-Analog: 117 dB
    • Equivalent Input Noise (20 Hz to 20 kHz, A-weighted, input terminated with 150 ):
      • Line: -86 dBV
      • Aux: -98 dBV
    • Total Harmonic Distortion: @ 1 kHz, 0 dBV Input, 0 dB analog gain: <0.05%
    • Common Mode Rejection Ratio: 150 balanced source @ 1 kHz: >50 dB
    • Input Impedance: 9.6 kΩ
    • Input Clipping Level:
      • Line: +27 dBV
      • Aux: +15 dBV
    • Output Impedance: 80 Ω
    • Output Clipping Level:
      • Line: +20 dBV
      • Aux: +0 dBV
      • Mic: -26 dBV
  • Mobile Connection (3.5 mm Connector):
    • Pin Assignments:
      • Tip: Audio Input (Left)
      • Ring 1: Audio Input (Right)
      • Ring 2: Ground
      • Sleeve: Audio Output (To Phone)
    • Dynamic Range (20 Hz to 20 kHz, A-weighted, typical):
      • Analog-to-Dante: 99 dB
      • Dante-to-Analog: 90 dB
    • Equivalent Input Noise (20 Hz to 20 kHz, A-weighted, input terminated with 20 ): -95 dBV
    • Total Harmonic Distortion (@ 1 kHz, 0 dBV Input, 0 dB analog gain): <0.05%
    • Input Impedance: 3.7 kΩ
    • Input Clipping Level: +4 dBV
    • Output Impedance: 1.4 kΩ
    • Output Clipping Level (Output terminated with 2.2 kΩ): -20 dBV
  • Networking:
    • Cable Requirements: Cat 5e or higher (shielded cable recommended)

This Shure MXA920ALR + P300-V Ceiling Mic and Speaker Bundle is perfect for meetings, conferences, and presentations. The MXA920ALR ceiling array microphone features Automatic Coverage technology for easy setup and precise audio capture. It covers a 30 x 30' area and offers automatic and steerable coverage options. The P300-IMX IntelliMix Audio Conferencing Processor simplifies setup with predefined matrix and presets. It connects multiple devices and ensures echo- and noise-free conference room audio. The bundle includes 1x MXA920AL-R and 1x P300-IMX. The MXA920ALR weighs 12.7 lbs (5.8 kg), and the P300-IMX weighs 1710 g (3.8 lbs). Dimensions for the P300-IMX are H x W x D: 4 x 21 x 22.6 cm (1.6 x 8.3 x 8.9 in.).