Martin P3 PowerPort 1500 - Your Ultimate Integrated Power Supply
The P3 PowerPort 1500 is a game-changer for Martin's creative LED video products! It's like having a supercharged power and data processor all in one. Whether you're working with the VDO Sceptron, Exterior PixLines, VC-Grids, VC-Strips, or VC-Dots, this integrated power supply is a must-have.
- • Power and data in one for Martin's LED video products
- • Easy setup and configuration - no headaches!
- • Flexible integration - can be placed remotely
Features:
- • P3 image processing technology for stunning visuals
- • Set-up and addressing via P3 System Controller family
- • P3 input and thru for seamless daisy-chaining
- • 4 hybrid power/data output ports for convenience
- • Wall-, truss- and rack-mountable for easy installation
- • Can be located up to 50 m away from the LED video products
Specifications:
Physical
- Depth: 335 mm (13.2 in.)
- Width: 482 mm (19.0 in.)
- Height (rackmount 2U): 88 mm (3.5 in.)
- Weight: 10 kg (22.1 lbs.)
Control and Programming
- Addressing and status: Via P3 System Controller
- Mapping: Via P3 System Controller
- Firmware update: Via P3 System Controller
Control/User Interface
- Device status: Multicolor status LED
- Power output status: Four LEDs
- Data output status: Four LEDs
- Device test and reset: Pushbutton to call up local test patterns and reset device
P3 Signal Protocol
- Signal type: Gigabit Ethernet
- Protocol: Proprietary Martin P3
- Hot pluggable: Yes, electrically isolated at all connections
- Cable type: Ethernet, CAT 5e or better
- Cable length: Up to 100 m between any 2 devices, extendable with Ethernet switch
System integration
- VC-Dot family via VC-Feeder
- Exterior PixLine family
- VDO Sceptron family
- VC-Grid family
- VC-Strip family
- Exterior Dot-HP family
Construction
- Housing: Steel and aluminum
- Color: Matt black
- Protection rating: IP20
Installation
- Mounting: 19-inch rackmount, wall mount, flown from rigging clamps
Connections
- Power input: Neutrik PowerCon
- P3 data in/out: Two Neutrik Ethercon RJ-45 sockets
- Combined power & data out: Four 4-pin female XLR sockets (hybrid power & data cable)
Electrical
- AC power: 100-240 V nominal, 50/60 Hz
- Power supply units: Auto-ranging electronic switch-mode
- Main fuses: 10 AT (slow blow) x 4
- Typical total power consumption: 1540 W (including full load of connected display devices, all at full intensity)
Thermal
- Cooling: Filtered forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 45° C
- Minimum ambient temperature (Ta min.): -20° C
- Total heat dissipation (calculated, +/- 10%): 530 BTU/hr. (not including display devices but with system at full load)
Approvals
- EU safety: EN 60950
- EU EMC: EN 55103-1, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
- US safety: ANSI/UL 60950-1
- Canadian safety: CSA C22.2 No. 60950-1
Included Items
- Mounting brackets incl. screws
- Safety cable attachment eyelet
Please note that a power input cable is not supplied with the product and must be ordered separately (see Accessories)
Accessories
- Air Filters 60x60, Set of 10: P/N 50404543
- Power Cable, H07RN-F, PowerCON-to-PowerCON, 1.2 m (4.0 ft.): P/N 91611798
- Power Cable, H07RN-F, PowerCON-to-PowerCON, 2.5 m (8.2 ft.): P/N 91611799
- Power Cable, H07RN-F, PowerCON-to-bare ends, 1.5 m (5.0 ft.): P/N 91611800
- Power Cable, H07RN-F, PowerCON-to-bare ends, 5 m (16.4 ft.): P/N 91611801
- Power Connector, Neutrik PowerCON NAC3MCA, male, cable mount: P/N 91611795
- Power Connector, Neutrik PowerCON NAC3FCA, female, cable mount: P/N 91611794
Rigging hardware
- G-clamp: P/N 91602003
- Half-coupler clamp: P/N 91602005
- Quick trigger clamp: P/N 91602007
The Martin P3 PowerPort 1500 Integrated Power Supply is designed for professionals working with Martin's creative LED video products like the VDO Sceptron, Exterior PixLines, etc. It's an all-in-one solution for power and data. With its easy setup, you can get started quickly. Physically, it has a depth of 335 mm (13.2 in.), width of 482 mm (19.0 in.), height of 88 mm (3.5 in.) when rackmounted 2U, and weighs 10 kg (22.1 lbs.).
