Shure MXCWAPT-W Wireless Access Point Transceiver for Global Use (Excluding Japan)
The MXCWAPT is the heart of the Microflex Complete Wireless conference system. It simplifies audio routing, coordinates frequencies, and controls the system for up to 125 wireless conference units.
During setup, it scans 2.4 GHz and 5 GHz bands to find the clearest channel and shares this info with the conference units. It uses DFS spectrum to expand channels. If there's a conflict, it tells all units to change channels smoothly.
The wireless connection has AES-128 encryption for privacy. It also has a Dante networked audio connection for 10 inputs and 10 outputs, plus analog XLR audio in and out for presenters' mics or audience sound systems.
You can configure the basic system without a laptop using the information display and controls. It's powered by a standard PoE switch or injector. Mount it on the wall or ceiling with the provided bracket and cover, or place it on a table for temporary meetings.
Key Features:
- • Effortlessly manages up to 125 MXCW640 wireless conference units
- • Bi-directional wireless connection for seamless audio and real-time control
- • Operates across 2.4 GHz / 5 GHz bands, including DFS spectrum
Benefits:
- • Automatic frequency coordination for interference-free conferencing
- • Dante digital audio for high-quality sound (10 inputs/10 outputs)
- • AES-128 encryption for enhanced privacy
Specifications:
- Analog Audio Inputs: Maximum Input Level varies based on type. Frequency Response is 22 Hz to 20 kHz with specific dB variations. Total Harmonic Distortion/Noise is low. Dynamic Range and Equivalent Input Noise have specific values. Connector Type is XLR-3-Pin Female.
- Analog Audio Outputs: Maximum Output Level is 4.3 dBV. Frequency Response is 1 Hz to 20 kHz. Total Harmonic Distortion/Noise is 0.01%. Dynamic Range is 100 dB. Load Impedance is >600 Ohms. Connector Type is 3-Pin XLR Male. Ground Lift has a switch position. Equivalent Noise Level and Input Impedance have specific values. Configuration is balanced.
- RF Specification: Follows IEEE 802.11 a, g standards. Frequency Bands are 2.4 GHz ISM and 5 GHz UNII. Sensitivity is -80 dBm at 10% PER. RF Output Power has different levels. Antenna Type is Proprietary Internal Bi-Level Dual-Band (PIFA), Patent Pending.
- Power: Runs on Power over Ethernet (PoE) 802.2 af, Class 0 PD. Supply Voltage is 37 to 57 V. Power Consumption is 12.95 W max, 6.5 W typical.
- Network: Interface is Gigabit Ethernet, Dante Digital Audio. Link Speed is 10/100/1000 Mb/s. Network Addressing can be DHCP or Manual IP Address. Cable Length is 328' / 100 m max. Cable Type is Cat 5e or higher.
- Display: Monochrome FFSTN LCD. Size is 1.84 x 0.074' / 46.7 x 18.8 mm. Resolution is 152 x 78 (78 ppi).
- General: Housing is Molded Plastic and Die-Cast Aluminum. Can be mounted on ceiling or wall. Operating Temperature Range is 19.4 to 120.2 °F / 7 to 49 °C. Storage Temperature is -20.2 to 140 °F / -29 to 60 °C. Dimensions are 1.88 x 9.55 x 9.52' / 47.8 x 242.5 x 241.8 mm. Weight is 2.54 lb / 1.15 kg.
The Shure MXCWAPT-W Wireless Access Point Transceiver is designed for conference setups. It's perfect for event organizers, conference centers, and anyone hosting meetings. This device manages audio routing, frequency coordination, and system control for up to 125 wireless conference units. During setup, it scans the 2.4 GHz and 5 GHz frequency bands to find the clearest channel and shares this info with the conference units. It uses DFS spectrum to expand channels. If there's a conflict, it tells all units to change channels smoothly. The wireless connection has AES-128 encryption for privacy. It also has a Dante networked audio connection for 10 inputs and 10 outputs, plus analog XLR audio in and out for presenters' mics or audience sound systems. You can configure the basic system without a laptop using the information display and controls. It's powered by a standard PoE switch or injector. Mount it on the wall or ceiling with the provided bracket and cover, or place it on a table for temporary meetings. The device has dimensions of 1.88 x 9.55 x 9.52' / 47.8 x 242.5 x 241.8 mm and weighs 2.54 lb / 1.15 kg.
