Shure MXA920W-R + P300-V Ceiling Mic and Speaker Bundle - The Ultimate Solution for Crystal Clear Audio
MXA920W-R
• Effortless audio capture with Automatic Coverage technology
• Next-generation array architecture for enhanced directional pickup
• Ideal for AV conferencing, camera tracking, voice lift, or sound reinforcement
P300-IMX
• Simplified setup with predefined matrix and presets
• Discrete installation with unobtrusive form factor
• Versatile connectivity options for various meeting rooms
Features:
- MXA920W-R:
- Perfect for meetings, conferences, and presentations
• Covers 30 x 30' area with no setup required
• Automatic and steerable coverage options
• Captures multiple talkers
• Automatic mixing and gain control
• Noise reduction and echo cancellation
• Dante, PoE, and audio via single cable
• Secure audio encryption
• 8 pickup lobes with individual outputs
• Designer system configuration software
- P300-IMX:
- Connects 10 Dante audio inputs, 2 analog inputs, USB, and mobile device to AV conferencing system
• Includes Shure developed DSP algorithms for enhanced audio quality
• Flexible signal routing and connectivity
• Power-over-Ethernet (PoE+) eliminates need for outboard power supply
• Compact form factor for easy mounting without equipment rack
Specifications:
- MXA920W-R:
- General:
- Coverage Type: Automatic or steerable
• Power Requirements: Power over Ethernet (PoE), Class 0
• Power Consumption: 10.1 W maximum
• Control Software: Designer or web application
• Cable Requirements: Cat5e or higher (shielded cable recommended)
• Connector Type: RJ45
• Plenum Rating: UL2043 (Suitable for Air Handling Spaces)
• Dust Protection: IEC 60529 IP5X Dust Protected
• Operating Temperature Range: 6.7°C (20°F) to 40°C (104°F)
• Storage Temperature Range: 29°C (20°F) to 74°C (165°F)
- Audio:
- Microphone Elements: 113 MEMS
• Frequency Response: 125 Hz to 20,000 Hz
• AES67 or Dante Digital Output:- Channel Count:
- Automatic coverage on: 2 total channels (1 output, 1 AEC reference in channel)
- Automatic coverage off: 10 total channels (8 independent transmit channels, 1 automix output, 1 AEC reference in channel)
- Sampling Rate: 48 kHz
• Bit Depth: 24
- Sensitivity: at 1 kHz, 1.74 dBFS/Pa
• Maximum SPL: Relative to 0 dBFS overload, 95.74 dBSPL
• Signal-to-Noise Ratio: Ref. 94 dBSPL at 1 kHz, 75.76 dB A-weighted
• Self Noise: 18.24 dB SPL-A
• Dynamic Range: 77.5 dB
• Digital Signal Processing: Automatic mixing, acoustic echo cancellation (AEC), noise reduction, automatic gain control, compressor, delay, equalizer (4-band parametric), mute, gain (140 dB range)
• Acoustic Echo Cancellation Tail Length: Up to 250 ms
- Dimensions:
- Weight: MXA920-R: 12.7 lbs (5.8 kg)
- P300-IMX:
- General:
- Input: (2) 3-pin block connector (Active Balanced)
• Output: (2) 3-pin block connector (Impedance Balanced)
• Mobile: (1) TRRS 3.5 mm (1/8')
- USB Connections:
- (1) USB 2.0, Type B
• Single port carries 2 input and 2 output channels (Summed mono)
- Network Connections (Dante Digital Audio):
- (1) RJ45
• 10 Dante Inputs, 8 Dante Outputs
- Polarity: Non-inverting, any input to any output
• Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4
• Power Consumption: 17.5 W, maximum
• Weight: 1710 g (3.8 lbs)
• Dimensions: H x W x D: 4 x 21 x 22.6 cm (1.6 x 8.3 x 8.9 in.)
• Control Software: Shure Designer
• Operating Temperature Range: 6.7°C (20°F) to 50°C (122°F)
• Storage Temperature Range: 29°C (-20°F) to 74°C (165°F)
• Thermal Power Dissipation:- Maximum: 17.5 W (60 BTU/hr)
- Typical: 14.6 W (50 BTU/hr)
- Audio:
- Frequency Response: +1, -1.5 dB, 20 to 20,000 Hz
• Dante Digital Audio:- Dante Digital Audio Sampling Rate: 48 kHz
• Bit Depth: 24
- USB Audio
- Sampling Rate: 48 kHz
• Bit Depth: 16, 24
- Latency:
- Firmware 4.1 and newer:
- Dante 1-8 in to Dante out (AEC enabled): 15.4 ms
- Dante 1-8 in to Dante out (AEC disabled): 8.7 ms
- Dante 9-10 in to Dante out: 3.4 ms
- Analog in to Analog out: 3.8 ms
- Firmware 3.1 and older:
- Dante 1-8 in to Dante out (AEC enabled): 12.5 ms
- Dante 1-8 in to Dante out (AEC disabled): 5.8 ms
- Dante 9-10 in to Dante out: 1.8 ms
- Analog in to Analog out: 2.2 ms
- Analog Connections (Block Connectors):
- Dynamic Range (20 Hz to 20 kHz, A-weighted, typical):
- Analog-to-Dante: 113 dB
- Dante-to-Analog: 117 dB
- Equivalent Input Noise (20 Hz to 20 kHz, A-weighted, input terminated with 150 ):
- Line: -86 dBV
- Aux: -98 dBV
- Total Harmonic Distortion: @ 1 kHz, 0 dBV Input, 0 dB analog gain: <0.05%
• Common Mode Rejection Ratio: 150 balanced source @ 1 kHz: >50 dB
• Input Impedance: 9.6 kΩ
• Input Clipping Level:- Line: +27 dBV
- Aux: +15 dBV
- Output Impedance: 80 Ω
• Output Clipping Level:- Line: +20 dBV
- Aux: +0 dBV
- Mic: -26 dBV
- Mobile Connection (3.5 mm Connector):
- Pin Assignments:
- Tip: Audio Input (Left)
- Ring 1: Audio Input (Right)
- Ring 2: Ground
- Sleeve: Audio Output (To Phone)
- Dynamic Range (20 Hz to 20 kHz, A-weighted, typical):
- Analog-to-Dante: 99 dB
- Dante-to-Analog: 90 dB
- Equivalent Input Noise (20 Hz to 20 kHz, A-weighted, input terminated with 20 ): -95 dBV
• Total Harmonic Distortion (@ 1 kHz, 0 dBV Input, 0 dB analog gain): <0.05%
• Input Impedance: 3.7 kΩ
• Input Clipping Level: +4 dBV
• Output Impedance: 1.4 kΩ
• Output Clipping Level (Output terminated with 2.2 kΩ): -20 dBV
- Networking:
- Cable Requirements: Cat 5e or higher (shielded cable recommended)
This Shure MXA920W-R + P300-V Ceiling Mic and Speaker Bundle is perfect for meetings, conferences, and presentations. The MXA920W-R has Automatic Coverage technology for easy audio capture and enhanced directional pickup. The P300-IMX simplifies setup and offers versatile connectivity. The MXA920W-R weighs 12.7 lbs (5.8 kg), and the P300-IMX weighs 1710 g (3.8 lbs) with dimensions of 4 x 21 x 22.6 cm (1.6 x 8.3 x 8.9 in.).
