Martin P3 PowerPort 1000 IP Rental: Your Ultimate Power and Data Solution for LED Video
Unleash the full potential of your creative LED video products with the Martin P3 PowerPort 1000 IP Rental! This all-in-one power supply and data processor is designed to revolutionize your rental setups, whether you're indoors or outdoors. • Integrated power and data processing for seamless operation. • Easy setup and configuration for hassle-free use. • Robust IP65 rating for reliable performance in any environment.
Features:
- Power and data processor for all Martin's rental market creative LED video products
- Flexible integration: can be located remotely, indoors or outdoors
- Easy cabling and configuration
- P3 image processing technology
- Set-up and addressing via P3 System Controller family
- No local configuration needed
- P3 input and thru to allow daisy-chaining
- 4 hybrid power/data output ports
- Truss-mountable or free-standing
- Can be located up to 50 m away from the creative LED video products
- IP65
Specifications:
Physical
- Length: 520 mm (20.5 in.)
- Width: 460 mm (18.2 in.)
- Height: 146 mm (5.8 in.)
- Weight: 8.5 kg (18.8 lbs.)
Control and Programming
- Addressing and status: Via P3 System Controller
- Mapping: Via P3 System Controller
- Firmware update: Via P3 System Controller
Control/User Interface
- Device status: Multicolor status LED
- Power output status: Four LEDs
- Data output status: Four LEDs
- Device test and reset: Pushbutton to call up local test patterns and reset device
- Status LEDs and pushbutton can be disabled remotely if required
P3 Signal Protocol
- Signal type: Gigabit Ethernet
- Protocol: Proprietary Martin P3
- Hot pluggable: Yes, electrically isolated at all connections
- Cable type: Ethernet, CAT 5e or better
- Cable length: Up to 100 m (328 ft.) between any 2 devices, extendable with Ethernet switch or conversion to fiber
System integration
- VC-Dot family via VC-Feeder
- Exterior PixLine family
- VDO Sceptron family
- VC-Grid family (indoor product)
- VC-Strip family (indoor product)
- Exterior Dot-HP family
Construction
- Protection rating: IP65
- NEMA enclosure rating: Type 3
- Housing: Aluminum
- Color: Matt black
- Effective Projected Area (EPA): 0.22 m2
- RoHS compliant
Installation
- Mounting: Flown from rigging clamps or free-standing
- Orientation: Any, except with connectors facing up or lid facing down
Connections
- Power input: Neutrik PowerCON True1
- P3 data in/out: Neutrik EtherCON Cat 6
- Combined power & data out: Four 6-pin custom (BBD) IP66-rated sockets
Electrical
- AC power: 120-240 V nominal, 50/60 Hz
- Power supply units: Auto-ranging electronic switch-mode
- Typical total power consumption: 1000 W (including full load of connected display devices, all at full intensity)
- Typical half-cycle RMS inrush current at 230 V, 50 Hz: 20.9 A
- Total power consumption in idle state (at 25° C, all connected devices powered off): 22 W
Thermal
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 55° C
- Minimum ambient temperature (Ta min.): -30° C
- Total heat dissipation (calculated, +/- 10%): 345 BTU/hr. (not including display devices but with system at full load)
Approvals
- EU safety: EN 60950
- EU EMC: EN 55032, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
- US safety: ANSI/UL 60950-1
- Canadian safety: CSA C22.2 No. 60950-1
The Martin P3 PowerPort 1000 IP Rental is a must-have for anyone in the LED video rental business. Whether you're setting up a large outdoor event or a small indoor display, this product is designed to make your life easier. • Use it for both indoor and outdoor rental installations of creative LED video products. • It's suitable for professionals in the event rental and staging industry. • Physical dimensions: Length 520 mm (20.5 in.), Width 460 mm (18.2 in.), Height 146 mm (5.8 in.), Weight 8.5 kg (18.8 lbs.).
